Gaskets and sealings for the wind industry
Are you looking for high-quality custom-made gaskets and sealings for the wind industry? Then you’ve come to the right address. Ridderflex has been specialised in the production of custom-made gaskets and seals for twenty-five years. Our product range varies from industry standards to complete customised solutions.
Especially for the wind industry
Ridderflex supplies various gaskets and seals for use in the wind industry. These are applied amongst others in the nacelle (engine room of the wind turbine), for example in the generator or the gear. A selection of our gaskets and sealings product range: rubber strips, rubber gaskets and rubber rings of various grades of rubber (self-adhesive or non-adhesive), cellular rubber strips and gaskets, manhole gaskets and PTFE sealing tape.
You will find all our gaskets and sealings for the wind industry in the catalogue below!
Sealings with a large diameter
Do you need a rubber or polyurethane gasket with a large diameter? No problem for Ridderflex. Our gaskets can be supplied in loose individual segments or ready made in one piece with diameters up to 20 or 30 meters. In addition, vulcanised or moulded rings are also possible. These gaskets can be applied, for example, between the foundation and the tower of the wind turbine. Or at the place where a seal is placed between the nacelle and the tower.
Custom-made gaskets and sealings
Ridderflex manufactures high-quality custom-made gaskets and seals. We work according to your drawing or model. Do you need a gasket with a large diameter? No problem – we can also work with segments. Are you looking for a complex product or do you have a technical problem? We advise you about all the possibilities. Call +31 (0) 180 46 34 71 or send us an e-mail.